Placing Originals
10
1
Original upper output
Originals are ejected onto the original stacker.
A
Check the upper output stackers are correctly installed on the top of the machine.
Originals are ejected onto the original stacker.
The original stacker can hold one original at a time. Remove each original af-
ter it is ejected by holding its leading edge.
Note
❒
If the original is larger than A1 (D)
L
, select original rear output.
❒
If the original is heavier than 157 g/m
2
(41.8 lb.), select original rear output.
❒
If the original is plain paper not heavier than 52.3 g/m
2
(13.9 lb.) or trans-
lucent paper not heavier than 80 g/m
2
(21.3 lb.), select original rear output.
❒
When copying a rolled original, prevent it curling up on the stacker by
holding its leading edge as it is ejected.
ATZ078S
ATZ021S