Ricoh GWD2004 Operating Instructions Manual Download Page 131

Page: 131 / 190

Copier Functions

113

Programmed Format Overlay

Uses a stored image as the background and combines it with a scanned image.
To use this function, you need to register the overlay format in advance.

Press

[

Edit / Stamp

]

Press

[

Edit Image

]

Press

[

Format Overlay

]

Press

[

Programmed Format Overlay

]

Select a stored format number.

Make the necessary settings.

Place your original, and let it be scanned.

The machine makes a copy overlaying the scanned original onto the stored
format.

Place any further originals, as required.

The machine makes a copy overlaying the new original onto the stored format.

Reference

p.114 “Storing a format”
p.115 “Overwriting a stored format”
p.115 “Deleting a stored format”
“Program / Delete Overlay Format”, General Settings Guide

Summary of Contents for GWD2004































































































































































































Search results

Summary of Contents for GWD2004

Reviews:

Ricoh GWD2004, Operating Instructions Manual, Page: 131 / 190

Search results

Summary of Contents for GWD2004

Reviews: