Ricoh GWD2004 Operating Instructions Manual Download Page 157

Page: 157 / 190

Using the Document Server

139

Registering or changing a user name (When using a user name registered to the
Address Book)

Following describes the procedure for registering or changing a user name to be
attached to a stored document.

Press

[

Scan Original

]

Press

[

User Name

]

The user name input screen will appear.

Select the user name, and then press

[

]

Registering or changing a user name (When using a user name not registered to the
Address Book)

Following describes the procedure for registering or changing a user name to be
attached to a stored document.

Press

[

Scan Original

]

Press

[

User Name

]

Select the user name, and then press

[

Manual Entry

]

The user name change screen will appear.

Enter the user name, and then press

[

]

twice.

Summary of Contents for GWD2004































































































































































































Search results

Summary of Contents for GWD2004

Reviews:

Ricoh GWD2004, Operating Instructions Manual, Page: 157 / 190

Search results

Summary of Contents for GWD2004

Reviews: