1. SPECIFICATIONS
Configuration:
Table top
Copy Process:
Electrostatic transfer system
Original Feed:
Sheet feed
Original Size:
Maximum: 914 x 3,600 mm
Minimum: 182 x 257 mm (B5 lengthwise)
Copy Size:
Same as "Original Size"
Copying Speed:
Manual feed:
5 cpm (A1/D sideways)
Tray feed:
6 cpm (A1/D sideways)
First Copy:
22 seconds (A1 sideways)
Warm-up Time:
Within 7 minutes (Room temperature 20
o
C)
Copy Counter:
1 to 9
Automatic Reset:
2 minutes after copying is finished (can be set
to 1, 3, 4, or 5 minutes or to no auto reset)
Photoconductor:
Organic photoconductor drum
Drum Charge:
Single-wire with grid plate (Negative Charge)
Reproduction Ratio:
1 : 1 (
±
0.5%)
Exposure System:
Slit exposure via fiber optic array
Exposure Lamp:
Fluorescent lamp (65 W)
Development:
Dual-component dry toner system
Toner Replenishment:
Cartridge system (750 g toner/cartridge)
Toner Consumption:
1,600 A1 or D copies per cartridge (7% original)
Development Bias:
Negative
Toner Density Control:
Pattern density detection by photosensor and
direct toner density detection by induction
sensor
Image Density Adjustment:
Development bias c exposure c
grid voltage control
Auto Image Density
Control:
Development bias control and exposure control
6 January 1990
1-1
Summary of Contents for FW 810
