Ricoh FT7950, Operating Instructions Manual

Page: 78 / 140

64
COPYING
You can shift the image either left or right to
make a binding margin.
Limitation
❏
If you set too wide a margin, areas you do
not want to delete might be erased.
Note
❏
The binding margin is automatically de-
fined on the back surface of the copy pa-
per in the 1 Sided
→
2 Sided mode. See
⇒
P.47 “1 Sided
→
2 Sided.”
❏
You can specify the width of the top and
bottom margins within the range of 0 - 15
mm in 2.5 mm steps (0 - 0.6" in 0.1" steps)
and that of the left and right margins within
the range of 0 - 16 mm in 1 mm steps (0 -
0.6" in 0.1" steps.)
1
Press the [Edit Image] key.
2
Press the [Margin Adj.] key.
3
Press the [Front] or [Back] key to select
the surface on which the binding mar-
gin is to be provided.
4
Specify the width of the binding margin
using the [
↑↑↑↑↑
][
↓↓↓↓↓
] keys or [
← ← ← ← ←
][
→ → → → →
] keys.
5
After setting all margins, press the [OK]
key.
6
Set your original and press the
{
Start
}
key.
MARGIN ADJUSTMENT