Ricoh FT7950, Operating Instructions Manual

Page: 120 / 140

106
REMARKS
WHERE TO PUT YOUR MACHINE
Machine Environment
Your machine’s location should be carefully chosen because environment conditions
greatly affect its performance.
Optimum environment conditions
R
CAUTION:
• Keep the machine away from humidity and dust. A fire or electric
shock might occur.
• Do not place the machine on an unstable or tilted surface. If it
topples over, it could cause injury.
R
CAUTION:
• If you use the machine in a confined space, make sure there is a
continuous air turnover.
• Temperature: 10 - 30°C (50-86°F)
• Humidity: 15 - 90 %
• A strong and level base.
• The machine must be level within 5mm, 0.2" both front to rear and left to rihgt.
• To avoid possible build-up of ozone, make sure to locate this machine in a large well ventilated
room that has an air turnover of more than 30m3/hr/person.
Environment to avoid
• Locations exposed to direct sunlight or strong light (more than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air froma heater.
• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas
• Area with corrosive gases.