manualshive.com logo in svg

Ricoh FT7950, Operating Instructions Manual

Share
Download
Ricoh FT7950 Operating Instructions Manual Download Page 32

18

BASICS

TONER

Handling Toner

R

 WARNING:

• Do not incinerate toner or toner containers.  Toner dust might

ignite, when exposed to an open flames.Dispose of the used toner
containers according to local regulations for plastics..

R

 CAUTION:

• Do not eat or swallow toner.
• Keep toner (used or unused) and toner containers out of reach

of children.

R

 CAUTION:

• This machine has been tested for safety using this supplier’s

parts and consumables.  We recommend you only use these
specified supplies.

 

Important

❏

If you use toner other than that recommended, a fault might occur.

 Reference

❏

If you want to add toner, see 

⇒

 P.79 “IF TONER RUNS OUT.”

Toner Storage

 Note

❏

When storing toner, the following precautions should always be followed:
• Store toner containers in a cool, dry place free from direct sunlight.
• Do not store toner where it will be exposed to heat.
• Do not eat or swallow toner, and keep it out of reach of children.
•  Store on a flat surface.

Used Toner

 Note

❏

Used toner cannot be re-used.

Summary of Contents for FT7950













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands