Ricoh DX 2330 Page 12 Operating Instructions Manual Download

Page: 12 / 88

Machine Exterior

Front door

Open for access to the inside of the ma-
chine.

Original delivery tray

The scanned original is delivered here.

Control panel

Operator controls and indicators are lo-
cated here. See p.9 “Control Panel”.

Document feeder cover

Open this cover to clean the document
feeder.

Right side cover

Open to replace the master roll or to clear
a master misfeed.

Feed roller pressure lever

Use to adjust the contact pressure of the
paper feed roller according to the paper
thickness.

Paper feed tray

Set paper on this tray for printing.

Paper feed side plates

Use to prevent paper skew.

Paper feed side plate lock levers

Use to lock or unlock the paper feed side
plates.

10.

Separation pressure lever

Use to prevent double-feed.

11.

Paper feed tray adjustment lever

Use to move the paper feed tray up or
down.

BAQ010S

C2748608_Titanium3-EN.book Page 7 Wednesday, November 19, 2008 10:25 AM

Summary of Contents for DX 2330

























































































Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands

Ricoh DX 2330, Operating Instructions Manual

Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands