Ricoh DX 2330 Operating Instructions Manual Download

Page: 32 / 88

Printing on Different Types of Paper Thickness

Separation Pressure Lever

To prevent double-feed, adjust
the paper separation pressure us-
ing the separation pressure lever.

Note

❒

Paper separation pressure can
be adjusted according to the pa-
per weights as shown in the fol-
lowing table.

This position can also be used if

the leading edge of the paper is

curled, or when the paper does

not feed properly.

Posi-
tion

Metric
version

Inch
version

Use this position if the lead-
ing edge of the paper is
curled, or when the paper
does not feed properly at Po-
sition 2.

35–47.0
g/m

81.6–127.9
g/m

9.3 – 12.5 lb.,
21.7–34.0 lb.

47.1–81.5
g/m

12.6–21.6 lb.

Use this position when a
double-feed occurs.

Use this position if double-
feeds persist even after the
lever has been shifted to Po-
sition 4.

C2748608_Titanium3-EN.book Page 27 Wednesday, November 19, 2008 10:25 AM

Summary of Contents for DX 2330

























































































Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands

Ricoh DX 2330, Operating Instructions Manual

Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands