Ricoh DX 2330 Operating Instructions Manual Download

Page: 54 / 88

Clearing Misfeeds

To prevent original misfeeds:

Use the exposure glass for the following kinds of originals.
• Originals heavier than 127.9 g/m

, 34.0 lb

• Originals lighter than 40 g/m

, 10.8 lb

• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals smaller than 90 mm

140 mm, 3.6"

5.6"

• Originals larger than 275 mm

395 mm, 10.8"

15.6"

• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals

Note

❒

The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5 mm, 0.2".

❒

a: 5 mm, 0.2"

❒

Remove staples or clips of originals. Fan originals that have had staples or
clips removed.

Original

C2748608_Titanium3-EN.book Page 49 Wednesday, November 19, 2008 10:25 AM

Summary of Contents for DX 2330

























































































Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands

Ricoh DX 2330, Operating Instructions Manual

Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands