Ricoh DX 2330 Page 44 Operating Instructions Manual Download

Page: 44 / 88

When the Add Ink Indicator (

) Lights

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights up when it is time to supply ink.

CAUTION:

Important

❒

Faults may occur if you use ink other than the recommended type.

❒

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies available
at an authorized dealer.

Open the front door.

•

Keep the ink or ink container out of reach of children.

•

Be careful not to get ink on your clothes when replacing an ink container. Ink
stains on clothes are hard to remove.

•

When disposing of a used ink container, reattach the cap to prevent ink from
splattering.

•

If your skin comes into contact with ink, wash the affected area thoroughly
with soap and water.

•

If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.

•

If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.

BQA013S

C2748608_Titanium3-EN.book Page 39 Wednesday, November 19, 2008 10:25 AM

Summary of Contents for DX 2330

























































































Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands

Ricoh DX 2330, Operating Instructions Manual

Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands