Ricoh DX 2330 Page 13 Operating Instructions Manual Download

Page: 13 / 88

Machine Interior

Document feeder

Place the original in the document feeder
one sheet at a time.

Main switch

Use to turn the power on or off.

Master eject box

Used masters are stored here.

Paper delivery side plates

Use to align the prints on the paper deliv-
ery tray.

Paper delivery end plate

Use to align the leading edge of prints.

Paper delivery tray

Completed prints are delivered here.

Drum unit

The master is wrapped around this unit.

Ink holder lock lever

Release this lever in order to pull out the
ink holder.

Drum unit lock lever

Lift to unlock and pull out the drum unit.

10.

Ink holder

Set the ink cartridge in this holder.

BQA011S

C2748608_Titanium3-EN.book Page 8 Wednesday, November 19, 2008 10:25 AM

Summary of Contents for DX 2330

























































































Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands

Ricoh DX 2330, Operating Instructions Manual

Search results

Summary of Contents for DX 2330

Reviews:

Related manuals for DX 2330

Brands by name

Popular brands