Ricoh C249, Service Manual

Page: 463 / 486

SETTING UP THE NIB FOR VARIOUS NETWORKS
SM 11 C624
Printer
Con
troller
C62
4
1.4 SETTING UP THE NIB FOR VARIOUS NETWORKS
This section gives a summary of how to set up the NIB in various network
environments.
NOTE: It is not recommended that service technicians program network and
protocol parameters. Ask the customer’s network administrator to program
and manage these parameters.
1.4.1 TCP/IP NETWORKS
The following parameters are available for TCP/IP network printing.
PARAMERTER DESCRIPTION
Protocol
(Default = Enabled) Disable this if TCP/IP is not used.
IP Address
(Default = 11.22.33.44) IP address of the NIB (required)
Subnet Mask
(Default = 0.0.0.0) Subnet mask for the subnet (required)
Default Gateway
(Default = 0.0.0.0) Default gateway of the subnet. This is required when the NIB
accessed from a host in a different subnet.
Access Control Address
Access Control Mask These two parameters are used to allow access to the NIB, only
to the hosts in the specified subnet.
For example, if the Access Control Address is set to “128.1.2.3”,
access to the NIB is restricted as follows:
•
When Access Control Mask is “255.0.0.0”, hosts in the
128.0.0.0 subnet can access the NIB.
• When Access Control Mask is “255.255.0.0”, hosts in the
128.1.0.0 subnet can access the NIB.
•
When Access Control Mask is “255.255.255.0”, hosts in the
128.1.2.0 subnet can access the NIB.
•
When Access Control Mask is “255.255.255.255”, only the
host that has the IP address 128.1.2.3 can access the NIB.
Network Boot
Use “NONE” when an IP address is specified manually
(default), or use “DHCP” if the NIB receives an IP address
from a DHCP server.
All other settings may not be used, unless the NIB is installed
in, for example, a UNIX network.
• RARP + TFTP
• BOOTP
•
RARP + BOOTP
•
ARP + PING
•
ARP & RARP
•
ARP & BOOTP
• ARP & RARP & BOOTP
Frame Type Ethernet II is always used.