Ricoh C249, Service Manual

Page: 353 / 486

MAIN MENU NO.8: SYSTEM TEST
SM 5-31 C264
C26
4
“Security Mode” is used to prevent others from accessing the master on the drum
and making prints of confidential documents.
When you set “Security Mode”:
•
You cannot press the “Proof” key or the “Print” key while the previous master is
on the drum
•
You cannot pull out the drum unit when the machine is in standby mode.
•
Printing will not start until you set a new original and press the “Start” key.
•
You cannot clear “Security Mode” by turning off the main switch.
5.9.6 SP8-21: PAPER FEED TEST (15 RPM)
Feeds paper at the lowest speed (15 rpm).
1. Set a stack of paper on the paper feed table.
2. Access SP8-21 and press the OK key.
3. Exit the SP mode and enter the number of sheets that you want to feed.
4. Press the Print key.
5. To exit this mode, turn off the main switch.
5.9.7 SP8-22: FREE RUN PAPER FEED (15 RPM)
Drives the paper feed mechanism at the lowest speed (15 rpm) without paper.
1. Access SP8-22 and press the OK key.
2. Exit the SP mode and enter the number of times that you want to repeat the
paper feed cycle.
3. Press the Print key.
To exit this mode, turn off the main switch.
5.9.8 SP8-23: 30-45-60 RPM PRINT MODE
This SP affects the operation of SP 6-100-107, SP 6-116-123, and SP 6-124-131, if
the temperature is low (below 15 degrees) or high (28 degrees or above).
NOTE: For details on these SPs, see sections 5.7.9, 5.7.10, and 5.7.11.
If SP 8-23 is set to ‘Off’, the machine makes 7 test copies at different speeds,
including two at 45 rpm.
If SP 8-23 is set to ‘On’, the machine makes 6 test copies at different speeds, and
omits one of the copies that are made at 45 rpm .
SP 8-23 automatically goes back to ‘Off’ after you turn the main switch off/on.