Ricoh C249, Service Manual

Page: 121 / 486

MAIN MENU NO.2: BASIC SETTINGS
SM 5-5 C249
Service
Tables
5.3.2 SP2-7: CHINESE DISPLAY SETTING (CHINA MODEL ONLY)
To change the warning message when you made a mistake of installing different
masters in the machine depends on the selling company.
0: Ricoh master type
1: Gestetner master type
5.3.3 SP2-32: INK SUPPLY AFTER TRIAL9
Ink is detected and supplied after the trial print when this SP is on.
5.3.4 SP2-33: RE - FEEDING SETTING
When the machine performs re-feeding, the paper registration position can be up to
5mm out of range. If this incorrect position is not acceptable to the customer,
change this SP mode to “OFF”.
ON: Re- feeding is on (factory setting).
OFF: Re- feeding is off.
5.3.5 SP2-34: SLOW STARTING MODE
Increase the image density of trial prints.
The figures below are drum-rotating speeds. A setting of “30rpm” will increase the
image density of trial prints.
This mode was added because trail print images are lighter than with other models.
Setting
Trial
Print
1st
Print
2nd
Print
3rd
Print
4th
Print
5th
Print
6th
Print
30rpm 30rpm 45rpm 60rpm 75rpm 90rpm 105rpm 120rpm
45rpm 45rpm 60rpm 75rpm 90rpm 105rpm 120rpm 120rpm
5.3.6 SP2-35: PRINTING PRESSURE ADJUSTMENT
Changes the printing pressure of all printing speed (60 to 120 rpm).
NOTE: 1) Adjust this SP mode after adjusting the printing pressure. (
!
3.8.3)
2) When adjust printing pressure of each printing speed or temperature,
use SP6-70 to 87.