Ricoh C249, Service Manual

Page: 31 / 486

INSTALLATION PROCEDURE
SM 1-9 C249
In
st
allat
io
n
1.2.2 BEFORE BEGINNING MACHINE OPERATION.
NOTE: Strips of tape and a styrene foam sponge have been added as shown
below to secure the Press Roller during transport. Please be sure to
remove the tape [A], sponge [B] and tag [C] by pulling the portion shown in
the illustration toward the front of the machine
before beginning machine
operation.
NOTE: If they are not removed:
Paper jams or blank images may occur, due to the lack of pressure on the
Press Roller.
The tape may stick to the drum screen or Press Roller.
[A]
[B]
[C]
Rev.04/2004
⇒