Ricoh BE-C1 D046, Field Service Manual, Page: 636 / 734

8
Delivery Server Maximum Entries
Lets you set the maximum number of account entries and information about the users of the
delivery server controlled by UCS.
[20000 to 50000/1]
10
LDAP Search Timeout
Sets the length of the time-out for the search of the LDAP server.
[1 to 255/1]
40
Addr Book Migration (USB -> HDD)
This SP moves the address book data from the SD card or flash ROM on the controller
board to the HDD. You must cycle the machine off and on after executing this SP.
1. Turn the machine off.
2. Install the HDD.
3. Turn the machine on.
4. Do SP5846 040.
5. Turn the machine off/on.
Note: Executing this SP overwrites any address book data already on the HDD with the
data from the flash ROM on the controller board.
We recommend that you back up all directory information to an SD card with SP5846-051
before you execute this SP.
After the address book data is copied to HDD, all the address book data is deleted from
the flash ROM. If the operation fails, the data is not erased from the flash ROM.
41
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes it
onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
8. Appendix: SP Mode Tables
188
8