Ricoh BE-C1 D046, Field Service Manual, Page: 614 / 734

1: Disable. Item for initial setting shown.
7 SSL Disable
Uses or does not use the RCG certification by SSL when calling the RCG.
[0 to 1 / 0 / 1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
8 RCG Connect Timeout
Specifies the connect timeout interval when calling the RCG.
[1 to 90 / 10 / 1 second /step]
9 RCG Write to Timeout
Specifies the write timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
10 RCG Read Timeout
Specifies the read timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
11 Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
21 RCG – C Registed
This SP displays the Embedded RC Gate installation end flag.
0: Installation not completed
1: Installation completed
22 RCG – C Registed Detail
This SP displays the Embedded RC Gate installation status.
0: RCG device not registered
1: RCG device registered
2: Device registered
23 Connect Type (N/M)
8. Appendix: SP Mode Tables
166
8