Ricoh Bc-C1, Field Service Manual, Page: 193 / 268

8. Turn the main power switch on. After about 45 seconds, the initial screen for the update
will appear on the LCD in English.
9. The file name for the update appears on the LCD. If the file is the one you want, press the
[OK] key.
10. The file is stored in memory, and the screen shown below appears. Press the [Execute]
key to start updating.
11. When updating completes, the screen shown below appears.
12. Turn the main power switch off.
13. Rear cover ( page 68 )
14. Press in the SD card to release it. Then remove it from the slot.
Firmware Update
191