Ricoh Bc-C1, Field Service Manual, Page: 145 / 268

2. Check the magnification ratio and adjust using the following SP mode if necessary.
SP No. SP Name Adjustment Range
SP4-008-001 Sub scan Mag. Adj ±1.0 %
ADF Image Adjustment
Registration
A: Leading Edge Registration
B: Side-to-side Registration
• Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed stations.
2. Check the registration, and adjust using the following SP modes if necessary.
SP No. SP Name Adjustment Range
SP6-006-001 ADF Adjustment SideEdge: Front ±3.0 mm
SP6-006-002 ADF Adjustment SideEdge: Rear ±3.0 mm
SP6-006-003 ADF Adjustment LeadingEdge: Front ±5.0 mm
SP6-006-004 ADF Adjustment LeadingEdge: Rear ±5.0 mm
Adjustment after Replacement
143