Ricoh Bc-C1, Field Service Manual, Page: 159 / 268

1-159-001 SC Display *ENG [0 to 1 / 0 / 1 / step]
0: Off (No fusing jam SC)
1: On (Fusing jam SC displayed)
1801 [MotorSpeedAdjust]
Adjusts the speeds of each motor.
1-801-001 MainMonitor:100 *ENG [-2.5 to 2.5/ 0 / 0.1% / step]
Adjusts the speed of main motor.
1903 [Feed Re-energize]
Directly reflects the adjusted value.
• A "+" setting increases the amount of driving.
• A “-” setting decreases the amount of driving.
1-903-001 Bypass Feed *ENG [-10 to 10 / 0 / 1 mm / step]
1-903-002 Tray1 Feed *ENG [-10 to 10 / 0 / 1 mm / step]
1907 [Paper Timing Adj.]
Adjusts the timing of paper feed. (A "+" setting broadens paper feed interval, a “-”
setting narrows paper feed interval.)
Parts Name -> ExitCL; Exit Clutch, D:ExCL; Exit Clutch in Duplex Mode, D:ReCL; Relay
Clutch in Duplex
1-907-001 ExitCL Stop Pos. *ENG [-30 to 30/ 0 / 1 mm / step]
1-907-002 ExitCL Start Pos. *ENG [-30 to 30/ 0 / 1 mm / step]
1-907-003 D:ExCL Stop Pos. *ENG [-30 to 30/ 0 / 1 mm / step]
1-907-004 D:ReCL Start Time *ENG [0 to 150/ 0 / 10 msec / step]
1-907-005 Duplex Feed Pos. *ENG [-30 to 30/ 0 / 1 mm / step]
1-907-006 Duplex Wait Pos. *ENG [-30 to 30/ 0 / 1 mm / step]
Engine SP Mode
157