Ricoh Bc-C1, Field Service Manual, Page: 164 / 268

2-301-053 1side:Thic2:Trail *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-111 2side:Plai1:Image *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-112 2side:Plai1:Lead *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-113 2side:Plai1:Trail *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-121 2side:Plai2:Image *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-122 2side:Plai2:Lead *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-123 2side:Plai2:Trail *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-131 2side:Mid:Image *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-132 2sideMid:Lead *ENG [-8 to 8 / 0 / 1 uA / step]
2-301-133 2side:Mid:Trail *ENG [-8 to 8 / 0 / 1 uA / step]
2302 [Transfer Curr Tim]
2-302-001 Lead Edge *ENG [-10 to 120 / 5 / 1 mm / step]
Sets to change the image transfer electric current position that is based on the FGATE
assert.
2-302-002 Trail Edge *ENG [-10 to 35 / 3 / 1 mm / step]
Sets to change the image transfer off position that is based on the FGATE negation.
2303 [Transfer Clean Bi]
2-303-001 Positive *ENG [3 to 20 / 10 / 1 uA / step]
Adjusts when backside contamination occurred that is caused by reverse polarity toner
on the transfer roller or weak charging toner on the drum.
2-303-002 Negative *ENG [0 to 20 / 4 / 1 –uA / step]
Adjusts to improve the toner cleaning performance adhered on the transfer roller due
to paper jamming etc…
2-303-003 Deve Warmup - *ENG [0 to 20 / 4 / 1 –uA / step]
Adjusts to improve the toner cleaning performance at the development bias activating.
5. System Maintenance
162