Ricoh Bc-C1, Field Service Manual, Page: 150 / 268

Engine SP Mode
SP1-XXX (Paper Handling)
1001 [Sub Registration]
Leading Edge Registration Adjustment
(Tray Location, Paper Type, Color Mode), Paper Type: Plain, Middle Thick, Thick
Adjusts the leading edge registration by changing the registration motor operation
timing for each mode.
Increasing a value: an image is moved to the trailing edge of paper.
Decreasing a value: an image is moved to the leading edge of paper.
1-001-002 Tray: Plain *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-003 Tray: Mid Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-004 Tray: Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-007 Bypass: Plain *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-008 Bypass: Mid Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-009 Bypass: Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-013 Duplex: Plain: *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-014 Duplex: Mid Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1-001-015 Duplex: Thick *ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
1002 [Main Registration]
Adjusts the printing side-to-side registration from each paper feed station, using the
“Test Page” in the [User Tools]. Adjustments are supported for all five possible feed
trays (including optional trays).
1-002-001 By-pass *ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
1-002-002 Tray Main1 *ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
1-002-004 Tray Bank1 *ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
1-002-005 Tray Bank2 *ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
5. System Maintenance
148