Ricoh Bc-C1, Field Service Manual, Page: 152 / 268

1-103-002 Reload Temp. *ENG [90 to 190 / 160 / 1 deg / step]
Adjusts the reload temperature.
1-103-003 Thresh *ENG [60 to 160 / 140 / 1 deg / step]
Adjusts the threshold temperature for the
reload mode change from the forced
reload mode to normal reload control.
1-103-004 Forced ReloadTime *ENG [5.0 to 20.0 / 23.0 / 0.1 sec / step]
Adjusts the time for the forced reload mode
(no fusing idling).
1105 [Fusing Temp Adj]
Adjusts the target fusing temperature. "Center" indicates the center of the roller; "End"
indicates the front and rear ends.
(Paper Type, Fusing Control Mode) Plain 1/2, Middle Thick, Thick 1/2
1-105-001 Center:Plain1 *ENG [160 to 200 / 170 / 1 deg / step]
1-105-003 Center:Plain2 *ENG [160 to 200 / 175 / 1 deg / step]
1-105-005 Center:M-Thick *ENG [160 to 200 / 175 / 1 deg / step]
1-105-007 Center:Thick *ENG [0 to 40 / 15 / 1 deg / step]
Adjusts the additional temperature for the
thick paper. This value is added to the
temperature for the plain 1
(SP1-105-001).
1-105-008 Center:Thick2 *ENG [0 to 40 / 25 / 1 deg / step]
Adjusts the additional temperature for the
thick paper 2. This value is added to the
temperature for the plain 1
(SP1-105-001).
1-105-009 Center Minus:Thin *ENG [0 to 20 / 10 / 1 deg / step]
Adjusts the subtract temperature for the
thin paper. This value is subtracted from
the temperature for the plain 1
(SP1-105-001).
5. System Maintenance
150