Ricoh Bc-C1, Field Service Manual, Page: 144 / 268

Registration: Platen Mode
A: Leading edge registration (L-Edge Regist Adj)
B: Side-to-side registration (S-Edge Regist Adj)
1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the leading edge and side-to-side registration, and adjust them using the following
SP modes if necessary.
SP No. SP Name Adjustment Range
SP4-010-001 L-Edge Regist Adj ±2.0 mm
SP4-011-001 S-Edge Regist Adj ±2.0 mm
Magnification
• Use an S5S test chart to do the following adjustment.
A: Sub scan magnification
1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
4. Replacement and Adjustment
142