Troubleshooting
76
Duplex Cancelled
Duplex printing specifications
canceled due to insufficient
memory or selection of a paper
size not compatible with duplex
printing.
Install additional memory units or re-
duce the amount of data sent.
Energy Save Mode
The printer is in Energy Saver
mode.
No action required.
Error: Enter 5
or 13 characters
An ID with an invalid number of
digits was entered for the WEP
key.
Enter the correct number of digits for
the WEP key.
Error: Enter 10
or 26 characters
An ID with an invalid number of
digits was entered for the WEP
key.
Enter the correct number of digits for
the WEP key.
Exceeded Max.
Pages (Collate)
The printer identified a collation
table overflow error.
Install additional memory units or re-
duce the amount of data sent.
Exceeded Max.
Stored Pages
The maximum number of pag-
es has been exceeded during
Sample Print or Locked Print.
Reduce the number of pages to print.
Exceeded Max.
Stored Files
The maximum number of
stored files has been exceeded
during Sample Print or Locked
Print.
Delete the stored files.
Hardware Problem
DIMM
An error has occurred in the
printer.
Turn the power off, and then on. If the
message appears again, call your
sales or service representative.
Hardware Problem
Ethernet
An error has occurred in the op-
tional network interface board.
Turn the power off, and then on. If the
message appears again, call your
sales or service representative.
Turn off the power. Replace the net-
work interface board and turn on the
power switch.
See “Attaching Network Interface
Board Type 2610”, Setup Guide.
Turn off the power, remove the net-
work interface board and turn on the
power.
❒
If you remove the network inter-
face board, you cannot print over
the network. You can send a print
jobs to the printer Only via a paral-
lel cable connection.
Messages/Second
messages
Description
Solution