Ricoh Aficio SP C311N, Information

Page: 71 / 306

Loading Paper
45
5
Loading Paper
This describes how to load paper into the paper tray and bypass tray.
R
WARNING:
R
CAUTION:
Loading Paper in Tray 1
The following example explains the loading procedure for the standard paper
tray (Tray 1).
Important
❒
Make sure paper is not stacked above the limit mark inside the tray. Misfeeds
might occur.
❒
After loading paper in the tray, specify the paper type and size using the con-
trol panel.
❒
Do not mix different types of paper in the same paper tray.
❒
If the bypass tray is open, close it before pulling out Tray 1.
❒
Do not move the side paper guides forcefully. Doing so can damage the tray.
❒
Do not move the end paper guide forcefully. Doing so can damage the tray.
❒
When inserting the tray, make sure it is not slanted. Inserting it at a slant can
damage the printer.
❒
Curled paper may jam, straighten curled paper before loading.
A
Lift and pull Tray 1 carefully, and then pull it out with both hands.
Place the tray on a flat surface.
• Do not put your hands inside the printer when the input tray is re-
moved. Some internal parts become hot and are a burn hazard.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.
ASI005S