Ricoh Aficio MP 3500 Series, Service Manual

Page: 312 / 908

SERVICE PROGRAM MODE TABLES
B291/B295/B296/B297 5-52 SM
IEEE 1394
Not supported by this machine.
5839
This SP is displayed only when an IEEE 1394 (firewire) card is installed.
Cycle Master 5839 7
Enables or disables the cycle master function for the 1394 bus standard.
[0~1/1]
0: Disable (Off)
1: Enable (On)
BCR Mode 5839 8
Determines how BCR (Broadcast Channel Register) operates on the 1394 standard
bus when the independent node is in any mode other than IRM. (NVRAM: 2-bits)
[Always Effective]
IRM 1394a Check 5839 9
Conducts a 1394a check of IRM when the independent node is in any mode other
than IRM.
[0~1/1]
0: Checks whether IRM conforms to 1394a
1: After IRM is checked, if IRM does not conform then independent node switches to
IRM.
Unique ID 5839 10
Lists the ID (Node_Unique_ID) assigned to the device by the system administrator.
Bit0: Off
Bit1: On
OFF: Does not list the Node_Unique_ID assigned by the system administrator.
Instead, the Source_ID of the GASP header in the ARP is used.
ON: The Node_Unique_ID assigned by the system administrator is used, and the
Source_ID of the GASP header in the ARP is ignored. Also, when the serial
bus is reset, extra bus transactions are opened for the enumeration.
Logout 5839 11
Handles the login request of the login initiator for SBP-2. (1-bit)
Bit0: Off
Bit1: On
OFF: Disable (refuse login). Initiator retry during login. Login refusal on arrival of
login request (standard operation)
ON: Enable (force logout). Initiator retry during login. Login refusal on arrival of login
request, and the initiator forces the login.
Login 5839 12
Enables or disables the exclusive login feature (SBP-2 related).
Bit0: Off
Bit1: On
OFF: Disables. The exclusive login (LOGIN ORB exclusive it) is ignored.
ON: Enables. Exclusive login is in effect.
Login MAX 5839 13
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA