Ricoh Aficio MP 3500 Series, Service Manual

Page: 314 / 908

SERVICE PROGRAM MODE TABLES
B291/B295/B296/B297 5-54 SM
5844* USB
Transfer Rate Full Speed /
Auto Change
5844 1*
Sets the speed for USB data transmission.
Full Speed: (12 Mbps fixed)
Auto Change: 480 Mbps/12 Mbps auto adjust
Vendor ID [0x0000~0xFFFF/
0x05CA
/1],
DFU
5844 2*
Sets the vendor ID: Initial Setting: 0x05CA Ricoh Company.
Product ID [0x0000~0xFFFF/
0x0403
/1],
DFU
5844 3*
Sets the product ID.
Device Release Number [0000~9999/
0100
/1],
DFU
5844 4*
Sets the device release number of the BCD (binary coded decimal) display.
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
Delivery Server Setting 5845*
Provides items for delivery server settings.
FTP Port No. [0~65535 /
3670
/ 1] 5845 1*
Sets the FTP port number used when image files are sent to the Scan Router
Server.
IP Address (Primary) Range:
000.000.000.000
~ 255.255.255.255 5845 2*
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Retry Time [60~900/
300
/1 sec.] 5845 3*
Sets the length of time to elapse before attempting to resend image files to the
Scan Router Server after an error occurs.
Note
: This SP setting is ignored if SP5845 004 is set to "0".
Retry Attempts [0~99/
3
/1] 5845 4*
Sets the number of attempts to resend image files to the Scan Router Server after
an error occurs.
Note
: SP5845 003 sets the time to elapse between retry attempts.
Delivery Error Display Time Netfiles: [0~999 /
300
/ 1] 5845 6*
Use this setting to determine the length of time the prompt message is displayed
when a test error occurs during document transfer with the NetFile application and
an external device.
5845 8* IP Address (Secondary) Range:
000.000.000.000
~ 255.255.255.255
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
5845 9* Delivery Server Model [0~4/
0
/ 1]
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA