Ricoh Aficio MP 3500 Series Page 336 Service Manual Download

Page: 336 / 908

SERVICE PROGRAM MODE TABLES

B291/B295/B296/B297 5-76

SP8-xxx: Data Log2

Many of these counters are provided for features that are currently not available,

such as sending color faxes, and so on. However, here are some Group 8 codes

that when used in combination with others, can provide useful information.

SP Numbers

What They Do

SP8211~SP8216

The number of pages scanned to the document server.

SP8401~SP8406

The number of pages printed from the document server

SP8691~SP8696

The number of pages sent from the document server

Specifically, the following questions can be answered:

•

How is the document server actually being used?

•

What application is using the document server most frequently?

•

What data in the document server is being reused?

Most of the SPs in this group are prefixed with a letter that indicates the mode of

operation (the mode of operation is referred to as an ‘application’). Before reading

the Group 8 Service Table, make sure that you understand what these prefixes

mean.

PREFIXES

WHAT IT MEANS

Total: (Grand Total).

Grand total of the items counted for all

applications (C, F, P, etc.)..

Copy application.

Fax application.

Print application.

Scan application.

Totals (pages, jobs, etc.) executed for each

application when the job was

not

stored on the

document server.

L: Local

storage

(document server)

Totals (jobs, pages, etc.) for the document server.

The L: counters work differently case by case.

Sometimes, they count jobs/pages stored on the

document server; this can be in document server

mode (from the document server window), or from

another mode, such as from a printer driver or by

pressing the Store File button in the Copy mode

window. Sometimes, they include occasions when

the user uses a file that is already on the

document server. Each counter will be discussed

case by case.

O: Other

applications

(external network

applications, for

example)

Refers to network applications such as Web

Image Monitor. Utilities developed with the SDK

(Software Development Kit) will also be counted

with this group in the future.

CÓPIA NÃO CONTROLADA

Summary of Contents for Aficio MP 3500 Series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 3500 Series

Reviews:

Related manuals for Aficio MP 3500 Series

Brands by name

Popular brands

Ricoh Aficio MP 3500 Series, Service Manual

Search results

Summary of Contents for Aficio MP 3500 Series

Reviews:

Related manuals for Aficio MP 3500 Series

Brands by name

Popular brands