Ricoh Aficio MP 3500 Series, Service Manual

Page: 789 / 908

BIT SWITCHES
SM 51 B779
Fax Op
tion
B77
9
Image Resolution of RX Text Mail 7
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
NOTE:
The “1” setting requires installation of the Function Upgrade Card in order to
have enough SAF (Store and Forward) memory to receive images at 400 x
400 resolution.
I-fax Switch 03 SP No. 1-102-004
No FUNCTION COMMENTS
Original Output at Transfer Station 0
This setting determines whether the original is output at the transfer station when it is
received from the sender that initiated the transfer transmission. This feature is the
same as for G3 transfer transmissions.
0: Received original not output at the transfer station.
1: Received original output. The original is printed after the transfer station has
transferred it to the destinations, so its output confirms that the original has been
transferred.
Transfer Result Report
1
This setting determines when a Transfer Result Report is generated and returned to
the transfer requestor.
0: Returns the report after each transfer.
1: Returns the report only if an error occurred during transfer.
Destination Error Handling for Reception Transfer Request
2
This setting restricts transfer transmission based on whether the final destinations are
correct or not.
0: The transfer station transmits to correct destinations only (addresses with no errors
in them).
1: If any address has an error in it, the transfer station transfers no transmissions and
returns a transfer transmission failure report to the requestor that initiated the
transfer.
There is no negotiation between the transfer initiator and the transfer station to
determine whether the final destination addresses are correct or not. This setting
determines whether or not the transfer station transfers the transmissions if there is a
mistake in even one of the final destination addresses.
Polling ID Check for Reception of Transfer Request
3
This setting determines whether the polling IDs of incoming transmissions are checked
to ensure that the polling IDs match.
0: Receives and transfers only messages that have matching polling IDs.
1: Receives and transfers all messages, even if the polling IDs do not match.
4-7 Not Used
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA