Ricoh Aficio MP 171F Operating Instructions Manual Download

Page: 52 / 136

Envelope types

Supported/Not supported

BAV026S

Supported

BAV027S

Supported

BAV028S

Supported

• You can load up to 10 envelopes (72 - 90g/m

) in the bypass tray at the same time, without

compressing them. Check the envelopes are not damp, and the top of the stack is not higher than the
limit mark on the side guide.

• When loading envelopes, be sure to unfold the flaps and position them opposite to the paper feed

direction.

• Load type (4) (162 114 mm / C6) (6.38 4.49 in. / C6) envelopes flap down, flap fold against

the side guide.

BRP009S

• Depending on the envelope type, specify an appropriate print image rotation using the printer driver.

For a type (1) - (4) envelope, rotate by specify 180 degrees.

2. Printing Documents

Summary of Contents for Aficio MP 171F








































































































































Search results

Summary of Contents for Aficio MP 171F

Reviews:

Related manuals for Aficio MP 171F

Brands by name

Popular brands

Ricoh Aficio MP 171F, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 171F

Reviews:

Related manuals for Aficio MP 171F

Brands by name

Popular brands