manualshive.com logo in svg

Ricoh Aficio MP 171F, Operating Instructions Manual

Share
Download
Ricoh Aficio MP 171F Operating Instructions Manual Download Page 30

10.

Click [Network Printer], and then click [OK].

11.

Double-click the name of the NetWare file server on the network tree.

The created queue is displayed.

12.

Select the print queue, and then click [OK].

13.

Check that the port of the selected printer is displayed in [Port].

14.

Click [Continue].

The printer driver installation starts.

15.

Click [Finish] in the [Select Program] dialog box.

16.

After the installation is completed, select one of the options to restart the computer either
now or later, and then click [Finish].

Restart the computer to complete installation.

17.

After restarting the computer, open the printer properties from the [Printers and Faxes]
window.

Under Windows 2000/Vista or Windows Server 2003/2003 R2/2008, launch the [Printers]
window, and then open the printer properties.

18.

Click the [NetWare setting] tab.

Under Windows Vista or Windows Server 2003/2003 R2/2008, on the [Printer Settings] tab, clear
the [Form Feed] and [Enable Banner] check boxes.
Do not select these check boxes since they are automatically selected by the printer driver. If you
select the check boxes, the printer may not print correctly.

19.

Click [OK] to close the printer properties dialog box.

• To stop installation of the selected software, click [Cancel] before installation is complete.
• The protocol is set to inactive as default. Enable it using SmartDeviceMonitor or Telnet.

Form Feed

Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on Windows. If
NetWare form feed is configured, the printer may not print properly.
Follow the procedure below to disable form feed according to the operating system used:

• Under Windows 2000/XP/Vista, or Windows Server 2003/2003 R2/2008, clear the [Form feed]

check box on the [NetWare Settings] tab in the printer properties dialog box.

1. Preparing the Machine

28

1

Summary of Contents for Aficio MP 171F









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands