Ricoh Aficio C7528n Page 105 Maintenance Manual Download

Page: 105 / 171

Troubleshooting

105

Replace Color

PCU soon (A)

The time to replace the color
PCU is soon.

Prepare to replace the color PCU
when the message “Replace Color
PCU (Type A)” appears on the dis-
play.

Replace Feed

Roller (Type H)

It is time to replace the feed roll-
er (Type H).

Replace the feed rollers. Depending
on your service contract, contact your
sales or service representative.

See

p.68 “Replacing the Paper Feed

Roller”

Replace Fusing

Unit (Type C)

It is time to replace the fusing
unit.

Replace the fusing unit. Depending on
your service contract, contact your
sales or service representative.

See

p.58 “Replacing the Fusing Unit”

Replace Fusing

Unit soon (C)

The time to replace the fusing
unit is soon.

Prepare to replace the fusing unit
when the message “Replace Fusing
Unit (Type C)” appears on the display.

Replace Transfer

Belt

It is time to replace the transfer
belt.

Replace the transfer belt. Depending
on your service contract, contact your
sales or service representative.

Replace Waste

Toner (Type E)

It is time to replace the waste
toner.

Replace the waste toner bottle. De-
pending on your service contract, con-
tact your sales or service
representative.

See

p.65 “Replacing the Waste Toner

Bottle”

Reset Develop.

Unit correctly

XXX/XXX

The indicated development
unit(s) is/are not set correctly,
or not set.

XXX: Yellow/Magenta/Cy-
an/Black

Set the indicated development unit(s)
correctly.

See

p.52 “Replacing the Development

Unit”

Reset Duplex

Unit correctly

The duplex paper feed unit is
not set correctly or not set.

Remove and re-install the duplex pa-
per feed unit. If the error continues,
contact your sales or service repre-
sentative.

See “Attaching Duplex Unit Type
7100”, Setup Guide.

Reset Finisher

correctly

The finisher is not set correctly,
or not set.

Turn the power off, and then on. Re-
move and re-install the finisher cor-
rectly. If the message appears again,
contact your sales or service repre-
sentative.

See

p.37 “Detaching and Reattaching

the Options”

Messages

/ Second messages

Description

Solution

Summary of Contents for Aficio C7528n












































































































































































Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands

Ricoh Aficio C7528n, Maintenance Manual

Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands