Ricoh Aficio C7528n Page 29 Maintenance Manual Download

Page: 29 / 171

Paper and Other Media

❒

The number of pages that can be loaded in the bypass tray differs depending
on paper type. Check that the top of the stack is not higher than the limit mark
inside the tray.

❒

When loading paper in the bypass tray, use

orientation if possible.

❒

When loading the bypass tray with paper that will be delivered into the top-left
tray, load the paper so the side you want to print on faces up.

❒

You cannot use the following functions when printing on paper loaded in the
bypass tray:

• Duplex Print

• Job Separation

• Staple/Punch

• Auto Tray Select

Open the bypass tray.

❒

If you load A4 or larger size paper, pull out the bypass tray extension, and
then flip it open.

Summary of Contents for Aficio C7528n












































































































































































Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands

Ricoh Aficio C7528n, Maintenance Manual

Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands