Ricoh Aficio C7528n Page 165 Maintenance Manual Download

Page: 165 / 171

Appendix

165

❖

Noise Emission

Sound Power Level

Sound Pressure level

The preceding measurements made in accordance with ISO7779 are actual val-
ues.

Measured at the position of a bystander.

❖

Memory:

Standard 256 MB, up to 512 MB (with the optional Memory Unit)

❖

Interface:

Standard:

• Ethernet (10Base-T, 100Base-TX)

• USB2.0

It requires a USB computer port and cable that support USB 2.0.

Optional:

• Gigabit Ethernet (1000Base-T)

• IEEE 1394 (SCSI print, IP over 1394)

• IEEE 802.11b (Wireless LAN)

• Parallel (Bidirectional IEEE 1284)

• Bluetooth

• USB host interface

❖

Printer Language:

RPCS, PJL, PCL 5c/e/6, PostScript Level 3, PDF, PictBridge

❖

Fonts:

PCL 5c

Agfa Font 35 Manager Intellifonts, 10 TrueType fonts, and 1 Bitmap font Agfa
Font Manager available, 58 fonts

PostScript 3

136 fonts

Main unit only

During Printing

66 dB (A)

Standby

43 dB (A)

Main unit only

Standby

26 dB (A)

During Printing

53 dB (A)

Summary of Contents for Aficio C7528n












































































































































































Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands

Ricoh Aficio C7528n, Maintenance Manual

Search results

Summary of Contents for Aficio C7528n

Reviews:

Related manuals for Aficio C7528n

Brands by name

Popular brands