Ricoh Aficio AP-4510 G065, Service Manual, Page: 93 / 278

DEVELOPMENT
SM 3-25 G065
Rep
lac
emen
t
an
d
Ad
ju
s
tm
e
n
t
7. Reassemble the development unit
8. Cover the toner entrance hole [A] with a piece of paper.
9. Install the development unit in the machine.
10. Turn on the main power switch, make sure that the machine has warmed up,
then perform the TD sensor initial setting using SP2801.
NOTE: When performing this setting, cover the toner entrance hole with a
piece of paper. This prevents used toner falling from the PCU into the
development unit during the TD sensor initial setting and interfering
with the Vref setting (toner density reference voltage).
11. After performing the TD sensor initial setting, remove the sheet [A] from the
development unit.
G065R518.WMF
[A]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA