Ricoh Aficio AP-4510 G065, Service Manual, Page: 200 / 278

SELF-DIAGNOSTIC MODE
G065 5-42 SM
5.5.2 DETAILED SELF-DIAGNOSTIC MODE
In addition to the self-diagnostic test initiated every time the main machine is
powered on, you can set the machine in a more detailed diagnostic mode manually
in order to test other components or conditions that are not tested during self-
diagnosis after power on.
The following device is required in order to put the printer in the detailed self-
diagnosis mode.
No. Name
G0219350 Parallel Loopback Connector
Follow this procedure to execute detailed self-diagnosis.
1. Switch off the printer.
2. Press and hold down the
!
(On line) and #(Enter) buttons together, then switch
on the printer.
3. Release the buttons when you see:
DIAGNOSE
0100
4. The number will change automatically as the self-diagnostic test runs. After
about 30 seconds, the initial display returns and a self-diagnostic report prints.
A report like the one below is printed every time a detailed self-diagnostic test
is executed, whether errors were detected or not.
M O D E L N A M E X X X X
Serial No Firmware P/# :
A C P 8 2 X X X X
[1/1]
F i r m w a r e V e r s i o n : 0 . 3 8 F r i S e p 7 0 5 : 4 5 : 1 8 2 0 0 1
[ S y s t e m C o n s t r u c t i o n ]
K e r n e l V e r s i o n : N e t B S D 1 . 3 . 3 ( H A K O N E _ R A M ) # 1 1 : S e p 4 1 1 : 1 8 : 4 8 J S T 2 0 0 1
C P U S y s t e m B u sC l o c k : 1 2 4 . 0 M H z C P U P i p e l i n e C l o c k : 2 4 8 . 0 M H z
B o a r d T y p e : 1 2 A S I C Version : 1128608306
R T C E x i s t e n c e : e x i s t e n c e R A M Capacity : 67:108864 MB
H D D E x i s t e n c e
: e x i s t e n c e
H D D M o d e l :
[Total C o u n t e r ]
0 0 0 1 0 0 0
[Error List ]
S C C O D E ( E R R O RC O D E ) S C C O D E ( E R R O R C O D E ) S C C O D E ( E R R O R C O D E ) S C C O D E ( E R R O R C O D E )
S C 8 3 5 ( 1 1 2 0 )
Self-Diagnosis Report
G065S901.WMF
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA