Ricoh Aficio AP-4510 G065, Service Manual, Page: 179 / 278

PRINTER ENGINE SERVICE MODE
SM 5-21 G065
Serv
ic
e
Ta
b
le
s
4. HDD (SP4000-00)
SP4 Mode Number Function and [Setting]
4911 01 Format HDD Formats the hard disk. After execution, you must
cycle the machine off and on with the power
switch.
5. Mode (SP5000-00)
SP5 Mode Number Function and [Setting]
5024* 01 mm/inch Display Selects the unit of measurement.
After selection, turn the main power switch off
and on.
0: mm , 1: inch
5104* 01 A3/DLT Double Count Specifies whether the counter is doubled for
A3/DLT.
0: No, 1: Yes
If 1 is selected, the total counter and the current
user code counter count up twice when A3 or
DLT paper is used.
5129 01 F Paper Selection Three selections are available for F-size paper.
[0 ~2 /
0 / 1 step]
0: Foolscap 8" x 13" Lengthways (SEF)
1: Foolscap 8
1/2
" x 13" Lengthways (SEF)
2: Folio 8
1/4
" x 13" Lengthways (SEF)
5131* 01 Paper Size Type Selection Selects the paper size type for printing..
[0~2 /
DIP SW setting / 1 step]
0: Japan
1: North America
2: Europe
After changing the setting, turn the copier off and
on. If the paper size of the archive files stored on
the HDD is different, abnormal prints could
result.
5501 03 PCU Count
Sets the timing of the display warning for
replacing the PCU. When printing reaches this
total, the replace PCU warning is issued.
[40 ~ 150 /
150 / 10K step]
Using the default setting, when the number of
prints reaches 150,000 (150 x 1,000) the
warning is issued with the PM Counter Display
(SP7803).
5801* Memory Clear Resets all correction data for process control
and all software counters, and returns all modes
and adjustments to their default values. (
☛
5.3.5)
Use this SP only after replacing the NVRAM, or
after the printer has malfunctioned due to a
damaged NVRAM.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA