Specifying a Destination
61
1
F
Press the
{
Start
}
key.
The machine starts to scan the original and stores it in memory. When scan-
ning ends, the Communicating indicator lights and transmission starts.
Note
❒
Depending on security settings,
[
Manual Input
]
may not appear, and you
may be unable to enter the IP-Fax destination.
❒
For a list of gateways (T.38-compliant), gatekeepers, or SIP servers that are certified
as operable with this machine, contact your local reseller or service representative.
❒
When using the transfer request function, you can specify the IP-Fax des-
tination to the transfer station. See “Sending the Transfer Result Report”.
❒
Methods of entering a destination vary depending on the network settings
made by the administrator. Ask the machine administrator for details. For
details about entering the IP-Fax destination, see “Regarding IP-Fax destinations”.
❒
To avoid accidentally pressing the wrong Destination key, you can set the
machine so that each time a destination is added using a Destination key,
[
Add
]
must be pressed. Make the setting in User Parameters (switch 17, bit 2)
in the Facsimile Features menu.
❒
For the maximum number of digits for a destination, see “Maximum Values”.
Reference
p.26 “IP-Fax Functions”
p.61 “Regarding IP-Fax destinations”
p.68 “Using the Address Book to Specify Destinations”
p.72 “Redial”
p.76 “Registering Entered Destinations to the Address Book”
p.166 “Sending the Transfer Result Report”
p.289 “Maximum Values”
“Entering Text”, About This Machine
“Facsimile Features”, General Settings Guide
Regarding IP-Fax destinations
Depending on the network to which this machine is connected or this machine's
configuration, enter the IP-Fax destination as follows:
❖
When not using a gatekeeper/SIP server
• From IP-Fax to IP-Fax
Specify the IPv4 address or host name of the receiving machine.
Example: 192.168.1.10 (IPv4 address)
Example: IPFAX1 (host name)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
