manualshive.com logo in svg

Ricoh Aficio 3030, Operating Instructions Manual, Page: 174 / 310

Share
Download
Ricoh Aficio 3030 Operating Instructions Manual Download Page 174

Reception

164

3

1.

E-mail transmitted without speci-

fying a subject in “E-mail Options”.

2.

E-mail transmitted with a subject

specified in “E-mail Options”.

3.

From

The name (e-mail address) of the sender

4.

Date

The date and time of e-mail transmission

5.

To

The e-mail address of the recipient

6.

Subject

Shows the subject specified in “E-mail
Options” at the time of transmission. If
no subject is specified, one is automati-
cally assigned in the format shown in 1
above.

7.

The message is inserted in all e-

mail. “xxxx” is the machine name.

8.

Attachment File

Any document included by the sender is
displayed as an attached document.

Note

❒

The display format of the sender name differs according to that of the Stamp
Sender Name setting and other functions. 

❒

The display format of the subject varies according to Stamp Sender Name and
other settings.

Reference

p.34 “E-mail Subject”
“System Settings”, General Settings Guide

ALV011S

Summary of Contents for Aficio 3030























































































































































































































































































































Reviews:

No comments