Ricoh Aficio 3030, Operating Instructions Manual, Page: 70 / 310

Transmission
60
1
C
Enter the IP-Fax destination, and then press [ OK ] .
If you have set both of “Enable H.323” and “Enable SIP” parameters to “On”
with “IP-Fax Settings” under “Facsimile Features”,
[ Protocol ] appears. Press
this button to select a protocol to be used.
If you enter an incorrect character, press
[ Backspace ] or [ Delete All ] . Then, re-
enter the characters correctly.
To change the IP-Fax destination after pressing
[ OK ] , press [ Edit Dest. ] , re-enter
an IP-Fax destination, and then press [ OK ] .
The destination is specified.
Press [ ProgDest ] in this order to store the entered IP-Fax destination in the Ad-
dress Book.
If you do not want to add a destination, proceed to step
F
.
D
To add a destination, press [ Add ] .
It is not necessary to press
[ Add ]
when adding destinations using the destination list.
E
Specify the next destination.
Pressing switches the destination list between fax number, e-mail ad-
dress, and IP-Fax destination.
To add another destination, repeat steps
D
and
E
.