manualshive.com logo in svg

Ricoh Aficio 3030, Operating Instructions Manual

Share
Download
Ricoh Aficio 3030 Operating Instructions Manual Download Page 116

Transmission

106

1

Before the Transmission Is Started

Use this procedure to cancel a transmission after the original is scanned.
This function is useful to cancel a transmission when you notice a mistake in des-
tination or with the originals after storing. To cancel Memory Transmission,
search for the file to be canceled among the files stored in memory, and then de-
lete it.
You can cancel transmission of a file while the file is being sent, stored in mem-
ory, or fails to transmit. All the scanned data is deleted from memory.

Important

❒

This function is unavailable with Immediate Transmission.

A

Press 

[

Change / Stop TX File

]

.

The list of stored files being transmitted or waiting for transmission appears.

B

Select the file you want to cancel.

If the desired file is not shown, press 

[

U

Prev.

]

 or 

[

T

Next

]

 to find it.

To display only the files being sent, press 

[

Files under TX

]

.

There are cases when a destination may not be selected as the destination ap-
pears as “

p

”, depending on the security settings.

Summary of Contents for Aficio 3030























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands