Ricoh Aficio 3030 Operating Instructions Manual Download Page 74

Page: 74 / 310

Transmission

Enter the e-mail address destination, and then press

[

]

If you enter an incorrect character, press

[

Backspace

]

[

Delete All

]

. Then, re-

enter the characters correctly.
To change the e-mail address after pressing

[

]

, press

[

Edit Dest.

]

, re-enter an

e-mail address, and then press

[

]

The destination is specified.

If you do not want to add a destination, proceed to step

Press

[

ProgDest

]

in this order to store the entered e-mail address in the Ad-

dress Book.
You can specify whether or not to bypass the SMTP server by pressing

[

SMTP

]

To add a destination, press

[

Add

]

It is not necessary to press

[

Add

]

when adding destinations using the destina-

tion list.

Summary of Contents for Aficio 3030























































































































































































































































































































Search results

Summary of Contents for Aficio 3030

Reviews:

Ricoh Aficio 3030, Operating Instructions Manual, Page: 74 / 310

Search results

Summary of Contents for Aficio 3030

Reviews: