Ricoh A161, Operating Instructions Manual, Page: 7 / 166

1. Operation panel Operator controls and indicators are located here.
2. Left scale Use to align originals on the exposure glass.
3. Platen cover
(option in some areas)
Lower this cover over originals for copying.
4. Exposure glass
Position originals here face down for copying.
5. Bypass feed table
Use to copy onto OHP sheets, adhesive labels,
translucent paper, and post cards.
6. 1000-sheet large
capacity tray
This tray can hold 1,000 sheets of copy paper.
Two of three models have this tray. (
See
page 2.)
7. Key counter holder
Insert the optional key counter here.
8. Front cover Open to access the inside of the copier.
9. 250-sheet tray This tray can hold 250 sheets of copy paper.
*10. 250-sheet tray
This tray can hold 250 sheets of copy paper. The
model with a unit for two-sided copying does not
have this tray. Instead, it has the unit for two-
sided copying (*11).
*11. Unit for two-sided
copying
This unit is used to make two-sided copies.
12. Main switch
Switches the copier between on and stand-by
conditions. ("stand-by" means that the anticon-
densation heaters are on.)
13. Copy tray
Completed copies are delivered here.
14. Toner Bottle
Replace the toner bottle when the Add Toner
indicator is lit or blinking.
15. Fusing Unit Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
f-eu-2
COPIER EXTERIOR AND INTERIOR
5