Ricoh A161, Operating Instructions Manual, Page: 47 / 166

Copying From The Bypass Feed Table
Use the bypass feed table to copy onto OHP transparencies, adhesive
labels, translucent paper, and post cards.
S
Adhesive labels should be fed from the bypass feed table one sheet at a time.
S
OHP transparencies should be fed from the bypass feed table. You can set ten
sheets at a time. However, if misfeed or multi-feed occurs, set sheets one at a
time.
S
OHP transparencies should be fanned to get air between the sheets before load-
ing.
S
Translucent paper should be fed from the bypass feed table.
S
Translucent paper should be fed so that the paper grain is oriented with the
paper path.
S
Postcards should be fed from the bypass feed table. Correct any curls they might
have before loading them.
S
It is recommended to feed one post card at a time.
S
When you use the bypass feed table while placing the original directly on the
exposure glass, lower the platen cover or optional document feeder before press-
ing the Start key.
S
Regarding functions that cannot be used together with this function, see page
86.
1
Set your original on the exposure
glass or in the optional document
feeder.
See page 31, 32, or
34.
2
Open the bypass feed table.
f-eu-5
FREQUENTLY USED FUNCTIONS
45