manualshive.com logo in svg

Ricoh A161, Operating Instructions Manual, Page: 2 / 166

Share
Download
Ricoh A161 Operating Instructions Manual Download Page 2

Do not eat or swallow toner, and keep it out of reach of children.

The fusing section can be very hot. Be careful when handling it.

CAUTIONS:

While copying, do not turn off the main switch.

While copying, do not open the front cover.

While copying, do not lift the platen cover, or the optional document feeder.

While copying, do not unplug the power cord.

Do not lay anything weighing more than 10 kg on the exposure glass.

Do not place tools or other hard objects on the exposure glass.

Keep corrosive liquids, such as acid, off the machine.

Do not allow paper clips, staples, or other small metallic objects to fall inside the
machine.

General Safety Information

S

Always turn the copier off when you have finished copying for the day, but leave
it plugged in.

S

When the copier will not be used for a long period, disconnect the power cord.

S

If the copier must be transported by vehicle, please contact your service repre-
sentative.

S

When the main switch is in the Stand-by position, the optional anticondensation
heaters are on. In case of emergency, unplug the machine’s power cord.

S

To disconnect the power source, the main plug must be pulled.

f-eu-1

ii

Summary of Contents for A161







































































































































































Reviews:

No comments