manualshive.com logo in svg

Ricoh A161, Operating Instructions Manual, Page: 150 / 166

Share
Download
Ricoh A161 Operating Instructions Manual Download Page 150

Environments to avoid

S

Locations exposed to direct sunlight or strong light (more than 1,500 lux.)

S

Locations directly exposed to cool air from an air conditioner or heated air from a
heater. (Sudden temperature changes might cause condensation within the cop-
ier.)

S

Places where the copier might be subjected to frequent strong vibration.

S

Dusty areas.

S

Areas with corrosive gases.

S

Places higher than 2,000 m above sea level.

Power connection

S

Connect the copier to a power source meeting the specifications given on the
inside front cover of this manual.

S

Avoid multiwiring.

S

Make sure that the wall outlet is near the copier and easily accessible.

S

Make sure the plug is firmly inserted in the outlet.

S

Voltage must not fluctuate more than 10%.

S

Do not set anything on the power cord.

S

Always turn the copier off when you have finished copying for the day, but leave
it plugged in.

Access to copier

Place the copier near the power source, providing clearance as shown.

f-eu-8

Copier

More than 28.5 cm

More than 70 cm

More than 10 cm

More than 39 cm

WHERE TO PUT YOUR COPIER

148

Summary of Contents for A161







































































































































































Reviews:

No comments