manualshive.com logo in svg

Ricoh A161, Operating Instructions Manual, Page: 100 / 166

Share
Download
Ricoh A161 Operating Instructions Manual Download Page 100

      IS LIT OR BLINKING: ADDING TONER

When the Add Toner 

 indicator blinks, it is time to supply toner (copying

is still possible). When the Add Toner 

 indicator is continuously on,

copies cannot be made until the toner bottle is replaced.

WARNING: Do not incinerate the used toner bottle. Toner dust might ignite

when exposed to open flame.

WARNING:  Dispose of the used toner bottle according to local regulations.

NOTE:  When adding toner, do not turn off the main switch. If you do, your copy

settings are cleared.

NOTE:  Before setting the new toner bottle, shake it well at least 5 or 6 times.

NOTE:  Do not remove the inner cap of the new toner bottle.

1

Open the copier’s front cover. 

2

You can find the sticker explain-
ing how to add toner inside the
front cover, as shown in the illus-
tration.

3

Load the new toner bottle follow-
ing the instructions on the sticker.

f-eu-6

      IS LIT OR BLINKING: ADDING TONER

98

Summary of Contents for A161







































































































































































Reviews:

No comments