manualshive.com logo in svg

Ricoh A161, Operating Instructions Manual, Page: 103 / 166

Share
Download
Ricoh A161 Operating Instructions Manual Download Page 103

      IS LIT: CLEARING MISFEEDS

WARNING:  Since some parts of the copier are supplied with high electrical volt-

age, touch only the parts specified in the instructions on the sticker
inside the machine’s cover.

WARNING: When removing misfed paper from sections B and C, use caution.

The fusing unit may be very hot. See page 4 for the position of the
fusing unit.

CAUTION:  Do not leave any torn scraps within the machine.

NOTE: When clearing misfeeds, do not turn off the main switch. If you do, your

copy settings are cleared.

NOTE:  After clearing misfeeds, make sure that all units and levers are returned to

their original positions and all covers are closed.

NOTE:  Do not touch originals in the optional document feeder when a paper mis-

feed occurs in the copier. If you do, the copier cannot know which originals
have been copied, and which should be copied.

Check The Misfeed Location Display

The display shows the location of
misfed paper. When there is an
original misfeed, P is lit.

f-eu-6

B

A

P

C

R

Z

Y

1
2
3

T

            IS LIT:  CLEARING MISFEEDS

101

Summary of Contents for A161







































































































































































Reviews:

No comments